All Category

MC Nylon Resin Plates / Sheets

View : Grid List
Filter

26 Item(s)

Set Ascending Direction
  1. MC Nylon MC901 Cutting Sheet
    Mitsubishi Chemical Advanced Materials (Former Polypenco) MC Nylon MC901 Cutting Sheet
    Well-balanced performance with good mechanical strength, heat resistance, abrasion resistance, chemical resistance, and machinability. By polymerizing and molding the main raw material nylon monomer under atmospheric pressure, the characteristics of nylon are improved, and it has excellent featur... Read More
    Thickness Tolerance (mm)  0~+1.0  Surface Resistance (Ω)  1013  Color  Blue  Type  Cutting board  Material  MC nylon (MC901)  Length Tolerance (mm)  ±0.3  Width Tolerance (mm)  ±0.3 
    Rating:
    88%
    from S$12.99
    Min. 2 days
  2. MC901 board
    Mitsubishi Chemical Advanced Materials (Former Polypenco) MC901 board
    This is a basic grade of MC nylon with improved mechanical strength, thermal properties, and chemical properties compared to general 6 nylon. It has excellent mechanical strength and durability compared to conventional nylon resin. It is a self-lubricating material with excellent sliding performa... Read More
    Thickness Tolerance (mm)  0~+1.0  Width Tolerance (mm)  0~+15.0  Length Tolerance (mm)  0~+20.0  Color  Blue  Material  MC nylon  Type  MC901 
    from S$459.90
    Min. 10 days
  3. MC nylon cutting board
    No Brand MC nylon cutting board
    Monomer cast nylon (MC901 manufactured by Polypenco)
    from S$159.90
    Min. 8 days
  4. 300x300x5mm MC nylon plate
    ESCO 300x300x5mm MC nylon plate
    Esco Part No.  EA441NC-5B 
    from S$76.99
    Min. 4 days
  5. 300x300x7mm MC nylon plate
    ESCO 300x300x7mm MC nylon plate
    Esco Part No.  EA441NC-7B 
    from S$97.99
    Min. 4 days
  6. MC901 board
    Mitsubishi Chemical Advanced Materials (Former Polypenco) MC901 board
    This is a basic grade of MC nylon with improved mechanical strength, thermal properties, and chemical properties compared to general 6 nylon. It has excellent mechanical strength and durability compared to conventional nylon resin. It is a self-lubricating material with excellent sliding performa... Read More
    Specific Gravity  1.16(D-792)  Bending strength (MPa)  110(D-790)  Length Tolerance (mm)  0~+20.0  Nominal Length (mm)  1200  Grade  Basic grade  Compression modulus (MPa)  3530(D-695)  Type  MC901  Nominal Width (mm)  600  Color  Blue  Elongation (%)  30(D-638)  Width Tolerance (mm)  0~+15.0  Tensile modulus (MPa)  3432(D-638)  Thickness Tolerance (mm)  0~+1.0  Tensile Strength (MPa)  96(D-638) 
    Discontinued
  7. MC602ST (High-strength, heat-resistant upgrade) board
    Mitsubishi Chemical Advanced Materials (Former Polypenco) MC602ST (High-strength, heat-resistant upgrade) board
    The MC602ST has improved machinability compared to the conventional MC601ST, especially reduces damage to the blade due to the filler, and extends the life to stabilize and maintain a good finished state. The filling material has been improved to improve the ease of cutting compared to the conven... Read More
    Surface Resistance (Ω)  1013  Length (mm)  1200  Width (mm)  600  Material  MC nylon  Type  MC602ST 
    from S$489.90
    Min. 10 days
  8. MC900NC board
    Mitsubishi Chemical Advanced Materials (Former Polypenco) MC900NC board
    This is a basic grade of MC nylon with improved mechanical strength, thermal properties, and chemical properties compared to general 6 nylon. It has excellent mechanical strength and durability compared to conventional nylon resin. It is a self-lubricating material with excellent sliding performa... Read More
    Thickness Tolerance (mm)  0~+1.0  Width Tolerance (mm)  0~+15.0  Length Tolerance (mm)  0~+20.0  Material  MC nylon  Type  MC900NC  Color  Natural color 
    from S$329.90
    Min. 10 days
  9. 600x600x10mm MC nylon board
    ESCO 600x600x10mm MC nylon board
    Esco Part No.  EA441NC-10D 
    from S$399.90
    Min. 4 days
  10. 300x300x10mm [Weather resistance] MC nylon plate
    ESCO 300x300x10mm [Weather resistance] MC nylon plate
    Esco Part No.  EA441NF-10B 
    from S$139.90
    Min. 4 days
  11. 300x300x10mm MC nylon plate
    ESCO 300x300x10mm MC nylon plate
    Esco Part No.  EA441NC-10B 
    from S$109.90
    Min. 4 days
  12. MC703HL (sliding grade) plate
    Mitsubishi Chemical Advanced Materials (Former Polypenco) MC703HL (sliding grade) plate
    A special lubricant has been added to the base of MC901 to further improve slip performance and wear resistance. It is a "stick slip countermeasure product" suitable for solving problems such as the machine not moving smoothly and vibrations occurring. MC901 is one of the materials with... Read More
    Thickness Tolerance (mm)  0~+1.0  Width Tolerance (mm)  0~+15.0  Length Tolerance (mm)  0~+20.0  Length (mm)  1200  Width (mm)  600  Material  MC nylon  Type  MC703HL  Color  Purple 
    from S$699.90
    Min. 10 days
  13. MC801 (weatherproof grade) board
    Mitsubishi Chemical Advanced Materials (Former Polypenco) MC801 (weatherproof grade) board
    Special graphite is added to the base of MC901 to improve weather resistance, wear resistance, and slip characteristics. The product color of MC801 with the addition of special graphite is metal black. It blocks ultraviolet rays and shows weather resistance. Withstands long-term outdoor use. It h... Read More
    Thickness Tolerance (mm)  0~+1.0  Width Tolerance (mm)  0~+15.0  Length Tolerance (mm)  0~+20.0  Color  Dark gray  Material  MC nylon  Type  MC801 
    from S$359.90
    Min. 10 days
  14. 300x300x5mm [Weather resistance] MC nylon plate
    ESCO 300x300x5mm [Weather resistance] MC nylon plate
    Esco Part No.  EA441NF-5B 
    from S$88.99
    Min. 4 days
  15. MC501CD R2 (conductive grade) board
    Mitsubishi Chemical Advanced Materials (Former Polypenco) MC501CD R2 (conductive grade) board
    Based on MC901, carbon-based filler is added to add conductive performance. It can also be used in places where it is difficult to make resin due to the generation of static electricity. The volume intrinsic resistance is as low as 1 to 102 Ωm. The filler of MC501CD is evenly dispersed, and the r... Read More
    Width Tolerance (mm)  0~+15.0  Length Tolerance (mm)  0~+20.0  Length (mm)  1200  Width (mm)  600  Color  Black  Material  MC nylon  Type  MC501CDR2 
    from S$779.90
    Min. 10 days
  16. MC501CD R9 (Antistatic / heat-resistant grade) board
    Mitsubishi Chemical Advanced Materials (Former Polypenco) MC501CD R9 (Antistatic / heat-resistant grade) board
    The antistatic characteristics and heat resistance in the high resistance range have been improved compared to the conventional MC501CD R6. Demonstrates heat resistance up to 150 ° C. It has antistatic performance with a volume specific resistance of 108 to 1010 Ωcm. Improvements have been made t... Read More
    Thickness Tolerance (mm)  0~+1.0  Width Tolerance (mm)  0~+15.0  Length Tolerance (mm)  0~+20.0  Surface Resistance (Ω)  106~109  Length (mm)  1200  Width (mm)  600  Color  Black  Material  MC nylon  Type  MC501CDR9 
    from S$979.90
    Min. 10 days
  17. 300x300x7mm [Weather resistance] MC nylon plate
    ESCO 300x300x7mm [Weather resistance] MC nylon plate
    Esco Part No.  EA441NF-7B 
    from S$129.90
    Min. 4 days
  18. 600x600x7mm MC nylon plate
    ESCO 600x600x7mm MC nylon plate
    Esco Part No.  EA441NC-7D 
    from S$359.90
    Min. 4 days
  19. Conductive MC nylon sheet
    KOKUGO Conductive MC nylon sheet
    Volume specific resistance value 10 2 to 10 4 Ω ・ cm, which is a very low resistance value. The resistance value is constant in all parts, so you can use it with confidence even after machining. Even if the surface is worn, the resistance value does not change, and the resistance value does not ... Read More
    Length (m)  1.2  Width (mm)  600 
    from S$999.00
    Min. 8 days
  20. 600x600x5mm MC nylon plate
    ESCO 600x600x5mm MC nylon plate
    Esco Part No.  EA441NC-5D 
    from S$269.90
    Min. 4 days
  21. MC nylon cutting board 100tx300x300
    Akitsu MC nylon cutting board 100tx300x300
    Mass (kg)  10.4  Thickness  100  Trusco Part No.  850-5600 
    from S$1,999.00
    Min. 9 days
  22. MC Nylon Sheet (MC801)
    KOKUGO MC Nylon Sheet (MC801)
    MC Nylon is a large engineering plastic manufactured by the casting method. In addition to strong mechanical strength and excellent wear resistance, it is also highly elastic and self-lubricating. High mechanical strength / Excellent mechanical strength and durability compared to conventional nyl... Read More
    Width (mm)  600  Length (mm)  1200 
    Discontinued
  23. MC Nylon Sheet (MC801)
    KOKUGO MC Nylon Sheet (MC801)
    MC Nylon is a large engineering plastic manufactured by the casting method. In addition to strong mechanical strength and excellent wear resistance, it is also highly elastic and self-lubricating. High mechanical strength / Excellent mechanical strength and durability compared to conventional nyl... Read More
    Discontinued
  24. MC500AS R11 (Antistatic grade, non-carbon) board
    Mitsubishi Chemical Advanced Materials (Former Polypenco) MC500AS R11 (Antistatic grade, non-carbon) board
    It is a high-tech material that combines the excellent sliding performance of MC nylon with antistatic performance. The half-life is 2 seconds or less due to the electrostatic damping characteristics (compliant with JIS L 1094). It is non-filler (non-carbon), and contamination by additives is min... Read More
    Width Tolerance (mm)  0~+15.0  Length Tolerance (mm)  0~+20.0  Length (mm)  1200  Width (mm)  600  Color  Ivory  Material  MC nylon  Type  MC500ASR11 
    Discontinued
  25. MC Nylon Sheet (MC801)
    KOKUGO MC Nylon Sheet (MC801)
    MC Nylon is a large engineering plastic manufactured by the casting method. In addition to strong mechanical strength and excellent wear resistance, it is also highly elastic and self-lubricating. High mechanical strength / Excellent mechanical strength and durability compared to conventional nyl... Read More
    Width (mm)  1000 
    Discontinued
  26. MC501CD R6 (Antistatic grade) board
    Mitsubishi Chemical Advanced Materials (Former Polypenco) MC501CD R6 (Antistatic grade) board
    Based on MC901, carbon-based filler is added to add antistatic performance. It can also be used in places where it is difficult to make resin due to the generation of static electricity. The volume intrinsic resistance is as low as 1 to 104 to 106 Ωm. The filler of MC501CD is evenly dispersed, an... Read More
    Color  Black  Type  MC501CDR6  Length Tolerance (mm)  0~+20.0  Material  MC nylon  Width Tolerance (mm)  0~+15.0  Length (mm)  1200  Width (mm)  600 
    Discontinued
View : Grid List
Filter

26 Item(s)

Set Ascending Direction