All Category

Square Nuts

A square nut is a type of nut and is a rectangular fixture that is used as a set with bolts and screws. Plate nuts with similar shapes are a kind of square nuts or similar ones. Unlike a hex nut, it is fastened with bolts after being fixed in the groove, so it is an advantage that it can be tightened without holding with both hands. The material is mainly stainless steel or iron. The surface treatment is applied with various treatment liquids such as chrome, chromate, trivalent white, etc. There are also types of “fabrics” that do not undergo surface treatment. Care must be taken when fixing the bolts, as tightening them properly may cause damage or loosening.

Other Related Pages

View : Grid List
Filter

Items 1 - 40 of 59

Set Ascending Direction
  1. Nut with plate
    YAHATA NEJI Nut with plate
    Used for height adjustment in combination with adjuster bolts
    Material  Iron  Surface Treatment  Trivalent Chromate 
    Rating:
    73%
    from S$23.99
    Min. 2 days
  2. Plate nut (stainless steel) (packed product)
    Osaka Spirit Plate nut (stainless steel) (packed product)
    Thread Type  Meter coarse  Material  Stainless steel 
    Rating:
    94%
    from S$6.49
    Min. 2 days
  3. Square Nut (Stainless) (Packed)
    Osaka Spirit Square Nut (Stainless) (Packed)
    Thread Type  Meter coarse  Material  Stainless steel 
    Rating:
    90%
    from S$6.49
    Min. 2 days
  4. Square nut (iron, trivalent white)
    Osaka Spirit Square nut (iron, trivalent white)
    Material  Iron  Thread Type  Meter coarse  Surface Treatment  Trivalent white 
    Rating:
    90%
    from S$6.49
    Min. 2 days
  5. Rectangular nut (iron / chromate) (packed product)
    Osaka Spirit Rectangular nut (iron / chromate) (packed product)
    Dimension C (mm)  3.2  Surface Treatment  Chromate  Material  Iron  Thread Type  Meter coarse 
    Rating:
    85%
    from S$6.49
    Min. 2 days
  6. Rectangular nut (iron / trivalent white) (packed product)
    Osaka Spirit Rectangular nut (iron / trivalent white) (packed product)
    Thread Pitch  Dimension B (mm)  17  Dimension A (mm)  23  Dimension C (mm)  3.2  Material  Iron  Nominal Size of Screw  M6  Thread Type  Meter coarse  Surface Treatment  Trivalent white 
    Rating:
    100%
    from S$6.49
    Min. 2 days
  7. Square nut (iron, chromate)
    Osaka Spirit Square nut (iron, chromate)
    Surface Treatment  Chromate  Material  Iron  Thread Type  Meter coarse 
    Rating:
    100%
    from S$6.49
    Min. 2 days
  8. Rhombus Nut Grade A (Iron / Unichrome) (Packed)
    Osaka Spirit Rhombus Nut Grade A (Iron / Unichrome) (Packed)
    Material  Iron  Thread Type  Meter coarse  Surface Treatment  Unichrome 
    Rating:
    100%
    from S$6.49
    Min. 2 days
  9. Square nut JIS B-1163 Cutting (stainless steel)
    Osaka Spirit Square nut JIS B-1163 Cutting (stainless steel)
    Thread Type  Meter coarse  Material  Stainless steel 
    Rating:
    80%
    from S$4.89
    Min. 2 days
  10. Square welding nut 1D type (iron / material)
    Osaka Spirit Square welding nut 1D type (iron / material)
    Material / Finish  Iron / fabric  Surface Treatment  Phosphate 
    Rating:
    100%
    from S$8.79
    Min. 2 days
  11. M 4 / 34x23mm square nut (10 pieces)
    ESCO M 4 / 34x23mm square nut (10 pieces)
    Esco Part No.  EA949GS-4 
    from S$10.99
    Min. 2 days
  12. M 8 / 34x23mm square nut (10 pieces)
    ESCO M 8 / 34x23mm square nut (10 pieces)
    Esco Part No.  EA949GS-8 
    from S$10.99
    Min. 2 days
  13. Square Nut (SS400 / Plain)
    Osaka Spirit Square Nut (SS400 / Plain)
    Thread Type  Meter coarse  Surface Treatment  Phosphate  Material  SS400 (fabric) 
    Rating:
    60%
    from S$15.99
    Min. 2 days
  14. M 5 / 34x23mm square nut (10 pieces)
    ESCO M 5 / 34x23mm square nut (10 pieces)
    Esco Part No.  EA949GS-5 
    from S$10.99
    Min. 2 days
  15. Square nut (iron, trivalent black)
    Osaka Spirit Square nut (iron, trivalent black)
    Material  Iron  Thread Type  Meter coarse  Surface Treatment  Trivalent black 
    from S$6.49
    Min. 2 days
  16. Plate nut (Iron / Uniqlo) (small box)
    Osaka Spirit Plate nut (Iron / Uniqlo) (small box)
    Material  Iron  Thread Type  Meter coarse  Type of Thread  Nut  Surface Treatment  Unichrome 
    from S$59.99
    Min. 2 days
  17. M 6 / 34x23mm square nut (10 pieces)
    ESCO M 6 / 34x23mm square nut (10 pieces)
    Esco Part No.  EA949GS-6 
    from S$10.99
    Min. 2 days
  18. Square weld nut M8 with pilot
    TRUSCO Square weld nut M8 with pilot
    It is square and has a cylindrical protrusion on the seat surface. It fits into the prepared hole of the steel plate and positions it. For thin plates where taps (female screws) cannot be cut.
    Mass (g)  100  Specification  1C  2018 Trusco page  2 0434  Trusco Part No.  856-4364  Nominal Size of Screw  M8  Nominal Diameter  M8  Material  Steel 
    from S$5.69
    Min. 2 days
  19. M10 / 34x23mm square nut (10 pieces)
    ESCO M10 / 34x23mm square nut (10 pieces)
    Esco Part No.  EA949GS-10 
    from S$10.99
    Min. 2 days
  20. Square weld nut M12 without pilot
    TRUSCO Square weld nut M12 without pilot
    It is square and has no pilot on the seat. It is used by providing a protrusion on the seat surface and welding it to a steel plate. For thin plates where taps (female screws) cannot be cut.
    Mass (g)  107.3  2018 Trusco page  2 0434  Trusco Part No.  856-4370  Nominal Size of Screw  M12  Specification  Square weld nut M12 Pilotless steel  Material  Steel 
    from S$7.79
    Min. 2 days
  21. Square weld nut M6 with pilot
    TRUSCO Square weld nut M6 with pilot
    It is square and has a cylindrical protrusion on the seat surface. It fits into the prepared hole of the steel plate and positions it. For thin plates where taps (female screws) cannot be cut.
    Specification  1C  2018 Trusco page  2 0434  Mass (g)  81.8  Trusco Part No.  856-4363  Nominal Size of Screw  M6  Nominal Diameter  M6  Material  Steel 
    from S$3.99
    Min. 2 days
  22. Square nut (Iron / Uniqlo) (small box)
    Osaka Spirit Square nut (Iron / Uniqlo) (small box)
    Material  Iron  Thread Type  Meter coarse  Type of Thread  Nut  Surface Treatment  Unichrome 
    from S$89.99
    Min. 3 days
  23. Square weld nut M8 without pilot
    TRUSCO Square weld nut M8 without pilot
    It is square and has no pilot on the seat. It is used by providing a protrusion on the seat surface and welding it to a steel plate. For thin plates where taps (female screws) cannot be cut.
    2018 Trusco page  2 0434 
    from S$3.99
    Min. 2 days
  24. Square weld nut M6 Pilotless
    TRUSCO Square weld nut M6 Pilotless
    It is square and has no pilot on the seat. It is used by providing a protrusion on the seat surface and welding it to a steel plate. For thin plates where taps (female screws) cannot be cut.
    2018 Trusco page  2 0434 
    from S$3.99
    Min. 2 days
  25. Square weld nut M4 without pilot
    TRUSCO Square weld nut M4 without pilot
    It is square and has no pilot on the seat. It is used by providing a protrusion on the seat surface and welding it to a steel plate. For thin plates where taps (female screws) cannot be cut.
    2018 Trusco page  2 0434 
    from S$3.99
    Min. 2 days
  26. Square weld nut M10 without pilot
    TRUSCO Square weld nut M10 without pilot
    It is square and has no pilot on the seat. It is used by providing a protrusion on the seat surface and welding it to a steel plate. For thin plates where taps (female screws) cannot be cut.
    2018 Trusco page  2 0434 
    from S$5.59
    Min. 2 days
  27. Square weld nut M5 without pilot
    TRUSCO Square weld nut M5 without pilot
    It is square and has no pilot on the seat. It is used by providing a protrusion on the seat surface and welding it to a steel plate. For thin plates where taps (female screws) cannot be cut.
    2018 Trusco page  2 0434 
    from S$3.99
    Min. 2 days
  28. Square weld nut M5 with pilot
    TRUSCO Square weld nut M5 with pilot
    It is square and has a cylindrical protrusion on the seat surface. It fits into the prepared hole of the steel plate and positions it. For thin plates where taps (female screws) cannot be cut.
    Specification  1C  2018 Trusco page  2 0434  Mass (g)  52.5  Trusco Part No.  856-4362  Nominal Size of Screw  M5  Nominal Diameter  M5  Material  Steel 
    from S$3.99
    Min. 2 days
  29. Plate Nut (Iron / Plain) (Small Box)
    Osaka Spirit Plate Nut (Iron / Plain) (Small Box)
    Material  Iron  Thread Type  Meter coarse  Type of Thread  Nut  Surface Treatment  Phosphate 
    from S$56.99
    Min. 3 days
  30. Plate nut (iron / chromate) (small box)
    Osaka Spirit Plate nut (iron / chromate) (small box)
    Surface Treatment  Chromate  Material  Iron  Thread Type  Meter coarse  Type of Thread  Nut 
    from S$59.99
    Min. 3 days
  31. Square nut Special size (iron / 3valent white) (small box)
    Osaka Spirit Square nut Special size (iron / 3valent white) (small box)
    Material  Iron  Thread Type  Meter coarse  Type of Thread  Nut  Surface Treatment  Trivalent white 
    from S$29.99
    Min. 3 days
  32. Square nut (special size) (iron / chromate) (small box)
    Osaka Spirit Square nut (special size) (iron / chromate) (small box)
    Surface Treatment  Chromate  Material  Iron  Thread Type  Meter coarse 
    from S$23.99
    Min. 12 days
  33. Square weld nut M4 with pilot
    TRUSCO Square weld nut M4 with pilot
    It is square and has a cylindrical protrusion on the seat surface. It fits into the prepared hole of the steel plate and positions it. For thin plates where taps (female screws) cannot be cut.
    Specification  1C  2018 Trusco page  2 0434  Mass (g)  67.5  Trusco Part No.  856-4361  Nominal Diameter  M4  Nominal Size of Screw  M4  Material  Steel 
    from S$3.99
    Min. 2 days
  34. Square nut (iron / 3valent white) (small box)
    Osaka Spirit Square nut (iron / 3valent white) (small box)
    Material  Iron  Thread Type  Meter coarse  Type of Thread  Nut  Surface Treatment  Trivalent white 
    from S$129.90
    Min. 3 days
  35. Diamond nut B type (Iron / Uniqlo) (Packed product)
    Osaka Spirit Diamond nut B type (Iron / Uniqlo) (Packed product)
    Material  Iron  Thread Type  Meter coarse  Surface Treatment  Unichrome 
    from S$6.49
    Min. 2 days
  36. Square nut (iron / chromate) (small box)
    Osaka Spirit Square nut (iron / chromate) (small box)
    Surface Treatment  Chromate  Material  Iron  Thread Type  Meter coarse  Type of Thread  Nut 
    from S$89.99
    Min. 3 days
  37. Square nut (iron / green chromate)
    Osaka Spirit Square nut (iron / green chromate)
    Surface Treatment  Green chromate  Material  Iron (or standard) 
    from S$6.49
    Min. 4 days
  38. Square nut (SUS304)
    Osaka Spirit Square nut (SUS304)
    Material  SUS304 
    from S$129.90
    Min. 5 days
  39. Square nut JIS B-1163 Cutting (stainless steel) (small box)
    Osaka Spirit Square nut JIS B-1163 Cutting (stainless steel) (small box)
    Thread Type  Meter coarse  Material  Stainless steel 
    from S$539.90
    Min. 3 days
  40. Plate nut (iron / trivalent black) (small box)
    Osaka Spirit Plate nut (iron / trivalent black) (small box)
    Color  Black  Material  Iron  Thread Type  Meter coarse  Surface Treatment  Trivalent black 
    from S$129.90
    Min. 3 days
View : Grid List
Filter

Items 1 - 40 of 59

Set Ascending Direction