All Category

Fine Screws

View : Grid List
Filter

Items 1 - 40 of 264

Set Ascending Direction
  1. Course thread trumpet head (value box)
    FAS-LINK Course thread trumpet head (value box)
    The course thread has a high thread and a long pitch, so it has excellent holding power, which is said to be five times that of nails.
    Finish  Unichrome 
    Rating:
    85%
    from S$22.99
    Min. 2 days
  2. Slender 2000
    Wakai Sangyo Slender 2000
    The course thread is slim and the special cutting of the screw tip is OK for hard materials! Interior, exterior *Due to its nature, there is a risk of twisting when used on hard wood. Please use it after trial hitting. *When using on hard wood, etc., we recommend that you pre-drill holes before u... Read More
    Rating:
    91%
    from S$15.99
    Min. 2 days
  3. Slim Thread Unichrome
    Osaka Spirit Slim Thread Unichrome
    It is a slightly slender structure. Construction with power tools is possible.
    Type  Half threaded  Material / Finish  Iron / Unichrome plating  Head Shape  With flat head flex 
    Rating:
    88%
    from S$9.99
    Min. 2 days
  4. Woodworking Fine Screw Box
    Wing Woodworking Fine Screw Box
    Extra-fine specifications to prevent wood cracking. Extra-fine specifications of course thread. With flexible head with tip cut. It goes smoothly into hardwood, is hard to crack, and has a flexible head, so your head will sink.
    Rating:
    91%
    from S$15.99
    Min. 2 days
  5. Coarse Thread with Flex
    FAS-LINK Coarse Thread with Flex
    The teeth (flexible) attached to the head allow the mating member to sit down and sink the head.
    Material  Iron  Finish  Unichrome  Surface Treatment  Unichrome 
    Rating:
    91%
    from S$15.99
    Min. 2 days
  6. Stainless steel course thread trumpet head
    FAS-LINK Stainless steel course thread trumpet head
    Martensitic SUS410 stainless steel has excellent hardenability and can be driven into hard boards without pilot holes.
    Material  Stainless steel SUS 
    Rating:
    88%
    from S$34.99
    Min. 2 days
  7. Fine screw (trivalent chromate)
    FAS-LINK Fine screw (trivalent chromate)
    By thinning the course thread with cut, it prevents wood cracking and can handle edge cutting. Even hard wood can be tightened comfortably with special cutting at the tip and a small flexible head. * Trivalent chromate = appearance color is close to UNIQLO (silver)
    Finish  Trivalent Chromate  Suitable Screwdriver  ♯2-H type 
    Rating:
    88%
    from S$25.99
    Min. 2 days
  8. Axial fine course thread screw (chromate)
    TRUSCO Axial fine course thread screw (chromate)
    Holding power is about 5 times that of nails. The shaft is thin and the tip cracking process prevents wood cracking. Excellent bite with a flexible head. Mainly used for wood.
    Surface Treatment  Chromate plating  Type of Thread  Half threaded  Material (Main Unit)  Iron  Bit No.  No.2 
    Rating:
    87%
    from S$7.79
    Min. 2 days
  9. XM7 stainless course thread trumpet head
    FAS-LINK XM7 stainless course thread trumpet head
    Austenitic SUS304 stainless steel has high corrosion resistance and is strengthened by increasing the material diameter.
    Material  Stainless steel SUS XM7 
    Rating:
    94%
    from S$39.99
    Min. 2 days
  10. Course thread resistant to rust
    OHSATO Course thread resistant to rust
    By adopting ultra-high corrosion resistant plating, it is resistant to rust. It is less rusty than SUS410 and resistant to electrolytic corrosion with aluminum and plated steel sheets. Even if the plating layer is scratched, it will self-repair. Rust-resistant course threads self-repair and prote... Read More
    Surface Treatment  Ionis coat  Material  Iron 
    Rating:
    88%
    from S$14.99
    Min. 2 days
  11. Stainless Steel Fine Thread
    FAS-LINK Stainless Steel Fine Thread
    By cutting the tip and reducing the screw diameter, it prevents wood cracking even if it is cornered. Martensitic SUS410 stainless steel has excellent hardenability and can be driven into hard boards without pilot holes. It sticks to the magnet.
    Material  SUS410 
    Rating:
    89%
    from S$39.99
    Min. 2 days
  12. Course thread BK small box
    Daido Hant Course thread BK small box
    Special surface treatment with a special tip shape that does not easily crack wood increases the screwing speed by 25% compared to the course thread (compared to the manufacturer's product)
    Color  Black  Material  Iron and zinc phosphate treatment 
    Rating:
    94%
    from S$17.99
    Min. 2 days
  13. Course thread flexi
    Daido Hant Course thread flexi
    The most common woodworking screw for working with power tools, with long thread spacing (coarse) and deep screw grooves. Flexible processing under the head cuts wood to prevent head floating. For woodworking * Screws may break due to overtightening. be careful. Please avoid using it for any purp... Read More
    Material  Steel  Surface Treatment  Unichrome 
    Rating:
    96%
    from S$4.49
    Min. 2 days
  14. (+) Course thread wrapper (SUSXM7) (Packed product)
    Osaka Spirit (+) Course thread wrapper (SUSXM7) (Packed product)
    A single thread refers to a product with 8 threads. It has five times the holding power of nails due to its high thread thread and wide pitch. In addition, the tip is sharp and hardened to give it strength. Course threads were originally created as a replacement for nails. Due to changes in build... Read More
    Material  SUSXM7 
    Rating:
    73%
    from S$5.69
    Min. 2 days
  15. Axial course thread
    Daido Hant Axial course thread
    Since the legs are split, the burden on the wood is reduced. Hard to crack! The lengths of 13 and 16 mm are not split to prevent idling. The flex processing under the head cuts the wood to prevent the head from floating. Woodworking screw with a thin shaft that is easy to drive * Screws may break... Read More
    Surface Treatment  Chromate  Suitable Screwdriver  Plus # 2  Material  Steel 
    Rating:
    100%
    from S$3.39
    Min. 2 days
  16. Stainless steel course thread trumpet head
    Wing Stainless steel course thread trumpet head
    Rust-resistant stainless steel! SUS304 Holding power 5 times stronger than nails! Rust-resistant stainless steel SUS304 is used, so it is safe to install around water or outside. It is recommended to make a pilot hole when used for hardwood.
    Rating:
    80%
    from S$34.99
    Min. 2 days
  17. Course thread screw (stainless steel)
    TRUSCO Course thread screw (stainless steel)
    Holding power is about 5 times that of nails. It is made of stainless steel and has excellent durability. Excellent biting with a flexible head. Mainly used for wood.
    Bit No.  No.2  Material (Main Unit)  Stainless steel (SUS410) 
    Rating:
    75%
    from S$11.99
    Min. 2 days
  18. Stainless steel screw with plastic case
    Wing Stainless steel screw with plastic case
    Strong and reliable stainless steel! SUS410 Uses stainless steel SUS410 with excellent strength. Stainless steel thin screw (slim screw). The tip is split to prevent wood cracking with an ultra-fine finish. With flexibility.
    Rating:
    100%
    from S$14.99
    Min. 2 days
  19. Stainless steel course thread with flexible box
    Wing Stainless steel course thread with flexible box
    Rust-resistant stainless steel! SUS304 Holding power 5 times stronger than nails! Rust-resistant stainless steel SUS304 is used, so it is safe to install around water or outside. Flexible head. It is recommended to make a pilot hole when used for hardwood. * All screws are not perfect screws. It ... Read More
    Rating:
    82%
    from S$34.99
    Min. 2 days
  20. Course thread
    Osaka Spirit Course thread
    It is a rough construction screw. Since the screw pitch is coarse, it can be installed with relatively low torque.
    Material / Finish  Iron / Unichrome plating  Head Shape  rap 
    Rating:
    85%
    from S$13.99
    Min. 2 days
  21. HC Course thread BK
    Daido Hant HC Course thread BK
    25% faster screwing speed than course thread due to special surface treatment with special tip shape that does not easily crack wood (compared to manufacturer's products) Comes in a hard case that is convenient for storage
    Color  Black  Material  Iron and zinc phosphate treatment 
    Rating:
    100%
    from S$9.39
    Min. 2 days
  22. Stainless thin screw
    Wing Stainless thin screw
    Strong and reliable stainless steel! SUS410 Uses stainless steel SUS410 with excellent strength. Stainless steel thin screw (slim screw). The tip is split to prevent wood cracking with an ultra-fine finish. With flexibility.
    Rating:
    20%
    from S$38.99
    Min. 2 days
  23. Course thread screw trumpet head (stainless steel)
    TRUSCO Course thread screw trumpet head (stainless steel)
    Holding power is about 5 times that of nails. It is made of stainless steel and has excellent durability. Mainly used for wood.
    Suitable Screwdriver  (+)NO.2  Material (Main Unit)  Stainless steel (SUS410) 
    Rating:
    100%
    from S$11.99
    Min. 2 days
  24. Course thread screw
    Marvel Course thread screw
    Trump cards for woodwork, abundant sizes! It cuts wood strongly, can be screwed in quickly, and tightens securely. For woodworking only
    Material  Iron  Surface Treatment  Unichrome 
    from S$23.99
    Min. 2 days
  25. Stainless steel course thread with flexible plastic case
    Wing Stainless steel course thread with flexible plastic case
    Rust-resistant stainless steel! SUS304 Holding power 5 times stronger than nails! Rust-resistant stainless steel SUS304 is used, so it is safe to install around water or outside. Flexible head. It is recommended to make a pilot hole when used for hardwood.
    Rating:
    100%
    from S$18.99
    Min. 2 days
  26. Stainless steel + course thread + flexible
    Daido Hant Stainless steel + course thread + flexible
    The most common woodworking screw for working with power tools, with long thread spacing (coarse) and deep screw grooves. Flexible processing under the head cuts wood to prevent head floating. Austenitic stainless steel (SUSXM7) that does not rust easily, making it ideal for outdoor use and aroun... Read More
    Surface Treatment  Pasipate  Suitable Screwdriver  Plus # 2 
    Rating:
    90%
    from S$9.99
    Min. 2 days
  27. HC color course thread
    Daido Hant HC color course thread
    Easy to take out and convenient to store Wood screws ・ Because the head is large, it is difficult for the seat to collapse
    Surface Treatment  Ruspart  Material  Steel 
    Rating:
    95%
    from S$14.99
    Min. 2 days
  28. Unichrome Coarse Thread Full Thread
    YAMAHIRO Unichrome Coarse Thread Full Thread
    Thread Diameter d  3.8  Head height H (mm)  4.5  RoHS directive (corresponding to 10 substances)  Correspondence  Screw Length S (mm)  Fully threaded  Nominal Size of Screw  M3.8  Surface Treatment  Unichrome 
    Rating:
    60%
    from S$23.99
    Min. 2 days
  29. Course thread trumpet small box (red box)
    Wakai Sangyo Course thread trumpet small box (red box)
    Material / Finish  Iron / Uniqlo 
    from S$13.99
    Min. 2 days
  30. Wings Course thread Color (white) with plastic case
    Wing Wings Course thread Color (white) with plastic case
    Ideal for wood base! White baking finish on the head. Since it is a course thread with a coarse pitch, it works well on a wooden base.
    Diameter (Φmm)  3.9  Nominal Size of Screw  M3.9 
    Rating:
    100%
    from S$11.99
    Min. 2 days
  31. Course thread + trumpet
    Daido Hant Course thread + trumpet
    The most common woodworking screw for working with power tools, with long thread spacing (coarse) and deep screw grooves. Since the trumpet head has a large ground contact surface when buried in wood, it firmly fixes the wood to each other and makes it difficult for the head to be buried. For woo... Read More
    Suitable Screwdriver  Plus # 2  Material  Steel  Surface Treatment  Unichrome 
    Rating:
    100%
    from S$3.69
    Min. 2 days
  32. Rust-resistant course thread
    OHSATO Rust-resistant course thread
    Although it is made of iron, it is a course thread that is more resistant to rust than stainless steel (SUS410). Excellent strength by quenching. The plating has a self-healing function and is resistant to rust even if it is damaged.
    Surface Treatment  Ionis coat  Material  Iron 
    Rating:
    100%
    from S$7.79
    Min. 2 days
  33. Non-head course
    YAMAHIRO Non-head course
    Head height H (mm)  0.9  Screw pitch p (mm)  3.2  Thread Diameter d  4.8  Head Diameter D (Φmm)  8.5  Specification  Chrome-free  RoHS directive (corresponding to 10 substances)  Correspondence  Nominal Size of Screw  M4.8  Finish  Trivalent unichrome 
    Rating:
    84%
    from S$39.99
    Min. 2 days
  34. Course thread for hardwood
    Wakai Sangyo Course thread for hardwood
    Uses SUS305J1 with excellent rust prevention "Difficult to screw" against hard wood "Long-lasting battery" with reduced torque * This product uses SUS305J1 and is extremely resistant to rust, but it may rust early depending on the site of use, environment, and other factors.
    Material  SUS305J1 
    from S$75.99
    Min. 2 days
  35. Axial fine course thread screw (stainless steel)
    TRUSCO Axial fine course thread screw (stainless steel)
    Pull-out strength UP Excellent biting with a flexible head. Since the shaft is thin and the tip is cracked, it is difficult for the board to be burdened and cracking is unlikely to occur. SUS410 Stainless steel is resistant to rust. For wood.
    Bit No.  No.2  Material (Main Unit)  Stainless steel (SUS410) 
    Rating:
    60%
    from S$11.99
    Min. 2 days
  36. "Tsubasa" course thread
    Wing "Tsubasa" course thread
    High quality and reliable course thread holding power 5 times more than nails. High quality with peace of mind for standard course threads.
    Rating:
    60%
    from S$29.99
    Min. 2 days
  37. Course thread with square holes
    FAS-LINK Course thread with square holes
    By changing the cross hole to a square hole, bit chipping, hole crushing, and screw fall are reduced, and driving is stable.
    Suitable Screwdriver  Square No.2  Material / Finish  Steel / Unichrome  Surface Treatment  Unichrome  Specification  With square hole (square bit type) 
    Rating:
    71%
    from S$26.99
    Min. 2 days
  38. Course thread for 18V impact driver
    OHSATO Course thread for 18V impact driver
    Even with an 18V impact driver, it is hard to break the screw. Twist breaking torque is improved by about 25% compared to the manufacturer's normal product. The screwing speed is amazing. The cutting speed is improved by starting to cut with a screw thread rising from the tip. WAX on the surf... Read More
    RoHS directive (corresponding to 10 substances)  Correspondence 
    Rating:
    100%
    from S$13.99
    Min. 2 days
  39. Stainless steel + course thread + trumpet
    Daido Hant Stainless steel + course thread + trumpet
    The most common woodworking screw for working with power tools, with long thread spacing (coarse) and deep screw grooves. Since the trumpet head has a large ground contact surface when buried in wood, it firmly fixes the wood to each other and makes it difficult for the head to be buried. Austeni... Read More
    Surface Treatment  Pasipate  Material  Stainless steel (SUS-XM7)  Suitable Screwdriver  Plus # 2 
    Rating:
    60%
    from S$25.99
    Min. 2 days
  40. Stainless steel course thread All screws
    YAMAHIRO Stainless steel course thread All screws
    Screw pitch p (mm)  2.8  Thread Diameter d  4.2  Head height H (mm)  4.5  Head Diameter D (Φmm)  8.0  Specification  Chrome-free  RoHS directive (corresponding to 10 substances)  Correspondence  Type  Fully threaded  Screw Length S (mm)  Fully threaded  Nominal Size of Screw  M4.2  Finish  Pasipate  Material  Stainless steel 
    from S$79.99
    Min. 2 days
View : Grid List
Filter

Items 1 - 40 of 264

Set Ascending Direction