All Category

Chemical Anchors

Chemical anchors are adhesive anchors that fix gold screws and deformed steel bars using chemical reactions. The capsule containing the solvent is inserted into a hole made in concrete, etc., and the capsule is destroyed by driving a gold screw, a sized iron, or a deformed steel rod, etc., causing a chemical reaction of the solvent to fix the anchor. It takes a while for each product to fix. In addition, it is also important to obtain sufficient fixing strength for concrete holes to carefully remove dust and other dust. Products with short capsules that can be used even with a small thickness, such as concrete, are available.
View : Grid List
Filter

Items 1 - 40 of 134

Set Ascending Direction
  1. Chemical Anchor Rod (Stainless Steel)
    No Brand Chemical Anchor Rod (Stainless Steel)
    Used for chemical anchors
    Material  Stainless steel (SUS304)  Tip Angle (°)  45  Type  Single-sided cut 
    Rating:
    91%
    from S$2.39
    Min. 2 days
  2. Chemical Anchor R Type (Standard Type)
    Nihon Decoluxe Chemical Anchor R Type (Standard Type)
    The embedding machine becomes lighter and the work load is reduced. Anchor muscle embedding time has been improved by approximately 20%. It does not contain 13 volatile organic compounds (VOCs) specified by the Ministry of Health, Labor and Welfare. By adopting non-styrene resin, unpleasant odors... Read More
    Material  Modified vinyl ester resin 
    Rating:
    90%
    from S$13.99
    Min. 2 days
  3. For chemical anchors Cut into pieces (Iron / Unichrome plating)
    No Brand For chemical anchors Cut into pieces (Iron / Unichrome plating)
    Used for chemical anchors
    Tip Angle (°)  45  Material  Iron unichrome plating  Type  Single-sided cut 
    Rating:
    85%
    from S$1.59
    Min. 2 days
  4. AR Chemical Setter SUPER LL AP
    Asahi KASEI AR Chemical Setter SUPER LL AP
    Since the main ingredient is epoxy acrylate resin, which has excellent alkali resistance, there is almost no decrease in fixing strength due to aging. Since it has high initial rigidity against tensile force and excellent toughness, it can be widely used for structural members. It is a glass-seal... Read More
    Specification  Rotating / hitting type 
    Rating:
    76%
    from S$3.99
    Min. 2 days
  5. Wire brush for adhesive anchor
    SANKO TECHNO Wire brush for adhesive anchor
    Metal wire type that demonstrates stable strength. Compatible with all types of adhesive anchors.
    Rating:
    90%
    from S$18.99
    Min. 2 days
  6. Adhesive anchor AR chemical setter HP anchor (rotating / hitting type film tube)
    Asahi KASEI Adhesive anchor AR chemical setter HP anchor (rotating / hitting type film tube)
    Excellent adhesion due to high-performance epoxy acrylate resin. The granular curing agent is dispersed throughout the capsule, eliminating uneven mixing with the resin when bolting, and achieving reliable curing. Seismic retrofitting work. For dam construction, etc. * The maximum tensile load is... Read More
    Specification  Rotating / hitting type 
    Rating:
    80%
    from S$2.99
    Min. 2 days
  7. AR chemical setter AP short type
    Asahi KASEI AR chemical setter AP short type
    By using "epoxy acrylate resin" as the main agent, it exhibits excellent adhesion. Demonstrates excellent alkali resistance. High initial rigidity and excellent toughness. Concrete, fence / soundproof wall installation, tunnel construction, dam construction, rockfall prevention net inst... Read More
    Ingredient  Main agent: Epoxy acrylate resin  Specification  Rotating / hitting type  Type  Short type 
    Rating:
    72%
    from S$3.69
    Min. 2 days
  8. AR chemical setter (short size)
    Asahi KASEI AR chemical setter (short size)
    A sealed resin capsule anchor that contains epoxy acrylate resin, which has excellent alkali resistance, strong adhesion strength, and almost no change over time, as the main ingredient, and a curing agent and aggregate in a glass tube at a fixed ratio. Since epoxy acrylate resin is used as the m... Read More
    Rating:
    97%
    from S$66.99
    Min. 2 days
  9. Chemical anchor R type (short type)
    Nihon Decoluxe Chemical anchor R type (short type)
    The embedding machine becomes lighter and the work load is reduced. Anchor muscle embedding time has been improved by approximately 20%. It does not contain 13 volatile organic compounds (VOCs) specified by the Ministry of Health, Labor and Welfare. By adopting non-styrene resin, unpleasant odors... Read More
    Material  Modified vinyl ester resin 
    Rating:
    77%
    from S$13.99
    Min. 2 days
  10. EA-500 (Resin Set)
    Asahi KASEI EA-500 (Resin Set)
    Two-component mixed injection type with built-in all power (Main agent) The main component is non-styrene epoxy acrylate, which has less odor and improves the environment at the construction site. In addition, by adding thixotropy, liquid dripping during ceiling construction has been eliminated. ... Read More
    Material  (Main agent) Epoxy acrylate resin 
    Rating:
    88%
    from S$149.90
    Min. 2 days
  11. Chemical anchor PG type (Chem punch)
    Nihon Decoluxe Chemical anchor PG type (Chem punch)
    Designed with consideration for the health of building users and enforcers. We use modified vinyl ester resin that does not use styrene, which is included in 13 volatile organic compounds (VOCs) that cause sick house syndrome, as defined by the Ministry of Health, Labor and Welfare. There is no s... Read More
    Rating:
    100%
    from S$13.99
    Min. 2 days
  12. Resin A injection type
    UNIKA Resin A injection type
    It is an injection type adhesive anchor. We can handle various bolts and deformed reinforcing bars. L-shaped and U-shaped lines can be constructed. Uses epoxy acrylate resin with high alkali resistance. Fixation to concrete, stone, ALC, hollow base material. Foundation work for steel frames, etc.... Read More
    Rating:
    80%
    from S$44.99
    Min. 2 days
  13. AR Chemical Setter MU type
    Asahi KASEI AR Chemical Setter MU type
    Just by driving it, it exerts a strong fixing force. L-shaped and U-shaped lines can be constructed. Has excellent alkali resistance. Fixation of concrete blocks. Soundproof wall mounting. For tunnel construction, etc. * The maximum tensile load is the value when the concrete strength is Fc21N / ... Read More
    Suitable Material  Concrete block  Specification  Driving type  Ingredient  Main agent: Epoxy acrylate resin 
    Rating:
    100%
    from S$4.59
    Min. 2 days
  14. Chemical cutting (iron / dove)
    Osaka Spirit Chemical cutting (iron / dove)
    Surface Treatment  Dove  Material  Iron 
    from S$3.49
    Min. 2 days
  15. EL350N cartridge
    Nihon Decoluxe EL350N cartridge
    Construction using modified vinyl ester resin that does not use "styrene" as a raw material, which the Ministry of Health, Labor and Welfare warns of "suspicion of carcinogenesis" and "risk of adverse effects on fertility or foetation" as hazard information. It does ... Read More
    Set Contents  1 EL-350 cartridge, 2 EL nozzles 
    Rating:
    69%
    from S$58.99
    Min. 2 days
  16. "Bolt Mate Epo EP-450" 300ml bottle type
    Maeda Kosen "Bolt Mate Epo EP-450" 300ml bottle type
    An injection-type adhesive post-construction anchor that mixes and installs a room-temperature curing type low-viscosity epoxy resin main agent and curing agent on-site. To stir and mix, just hold the main agent container in your hand and shake it, and no special equipment is required. It has a l... Read More
    Capacity (mL)  Main agent: 206 / curing agent: 94  Included Accessories  1 base bottle, 1 hardener bottle  Mass (g)  418  Applicable Standard  JAIA F ☆☆☆☆ compatible product  Trusco Part No.  467-5444 
    Rating:
    80%
    from S$47.99
    Min. 2 days
  17. Sankowa brush
    SANKO TECHNO Sankowa brush
    The wire part makes small scratches on the surface of the concrete hole to improve the adhesive strength of the adhesive anchor. A brush for cleaning chips in the holes * When selecting a product, be sure to pay attention to the applicable drilling diameter. * Be sure to wear leather gloves when ... Read More
    Drilling diameter (mm)  (Conformity) 19.0-20.0  Mass (g)  103.5  Brush Length (mm)  130  Outer Diameter (mm)  19  Overall Length (mm)  465  Trusco Part No.  859-6108  Material (Brush Part)  Metal  Specification  Sankowa brush  Material (Handle)  wood 
    from S$26.99
    Min. 2 days
  18. EA-500S exclusive mixing nozzle
    Asahi KASEI EA-500S exclusive mixing nozzle
    from S$63.99
    Min. 2 days
  19. EA-500 exclusive mixing nozzle
    Asahi KASEI EA-500 exclusive mixing nozzle
    The 12 spirals (blades) ensure that the main agent and curing agent are kneaded.
    from S$63.99
    Min. 2 days
  20. Evolock GL450
    Nihon Decoluxe Evolock GL450
    It meets the epoxy resin physical property standard values specified by NEXCO (former Japan Highway Public Corporation). Epoxy resin is the main component, and stable adhesive strength can be obtained due to its strong adhesive strength. Lean construction method: Since it is a cartridge type, an ... Read More
    Time can be Used (minutes)  (5℃)120、(10℃)90、(20℃)40、(30℃)25、(35℃)15  Curing Time (hours)  (5℃)24、(10℃)16、(20℃)8、(30℃)5、(35℃)4  Capacity (mL)  450 
    from S$69.99
    Min. 2 days
  21. EA-500S Recommended Dispenser
    Asahi KASEI EA-500S Recommended Dispenser
    from S$119.90
    Min. 2 days
  22. Perfix spike capsule (adhesive post-installation adhesive anchor)
    N Pat Perfix spike capsule (adhesive post-installation adhesive anchor)
    Highly corrosion-resistant vinyl ester resin that does not contain styrene is used as the main agent. Stepped glass is used for all sizes to ensure that the glass tube is crushed and that the resin and hardener are mixed more smoothly.
    Rating:
    80%
    from S$47.99
    Min. 2 days
  23. Resin A mixing nozzle (3)
    UNIKA Resin A mixing nozzle (3)
    Contains 3 mixing nozzles for both GE type and PE type.
    Mass (g/set)  31  Trusco Part No.  363-3128  Applicable cartridge  GE-165・GE-410・PE-400N  Material  Resin 
    Rating:
    80%
    from S$5.89
    Min. 2 days
  24. Chemical cutting (stainless steel)
    Osaka Spirit Chemical cutting (stainless steel)
    Material  Stainless steel 
    Rating:
    100%
    from S$4.19
    Min. 3 days
  25. Resin A injection gun
    UNIKA Resin A injection gun
    Injection gun for cartridges.
    from S$77.99
    Min. 2 days
  26. Chemical Insert (Steel)
    A.Y. Fastener Chemical Insert (Steel)
    Anchor method that combines an insert with an internal thread and a chemical anchor (resin fixing material). The attachment can be tightened with commercially available bolts like an internal screw anchor. You can freely choose the length of the bolt according to the thickness of the attachment. ... Read More
    from S$7.49
    Min. 2 days
  27. Resin A HC-U type (implanted type)
    UNIKA Resin A HC-U type (implanted type)
    Bolts and reinforcing bars can be cut into small pieces for construction. The unique glass tube shape reduces the number of hammer hits. Using vinyl ester resin with high alkali resistance, it can be stored for a long time before construction. Foundation work such as steel frames, road work, tunn... Read More
    Specification  Driving type  Material  Main agent: Vinyl ester resin 
    Rating:
    40%
    from S$2.69
    Min. 2 days
  28. EA-500 (base kit)
    Asahi KASEI EA-500 (base kit)
    A great value set with a storage bag. (Main agent) The main component is non-styrene epoxy acrylate, which has less odor and improves the environment at the construction site. In addition, by adding thixotropy, liquid dripping during ceiling construction has been eliminated. (Curing agent) A curi... Read More
    Material  (Main agent) Epoxy acrylate resin 
    Rating:
    40%
    from S$569.90
    Min. 2 days
  29. Chemical insert (stainless steel)
    A.Y. Fastener Chemical insert (stainless steel)
    Anchor method that combines an insert with an internal thread and a chemical anchor (resin fixing material). The attachment can be tightened with commercially available bolts like an internal screw anchor. The length of the bolt can be freely selected according to the thickness of the attachment.... Read More
    Material  Stainless steel 
    from S$13.99
    Min. 2 days
  30. Sartite
    KFC Sartite
    Achieves strength, excellent workability, and economy that are not inferior to conventional resin capsule anchors. Since it is a capsule type, it is easy to install without weighing, kneading, or injecting work. The water ratio is properly controlled just by immersing it in water, and stable perf... Read More
    RoHS directive (corresponding to 10 substances)  Correspondence 
    from S$34.99
    Min. 2 days
  31. EL mixing nozzle
    Nihon Decoluxe EL mixing nozzle
    The spiral structure allows the main agent and curing agent to be mixed reliably.
    from S$47.99
    Min. 2 days
  32. GLN Nozzle
    Nihon Decoluxe GLN Nozzle
    The spiral structure allows the main agent and curing agent to be mixed reliably. * If the drilling diameter is 19 mm or less and the drilling depth is 180 mm or more, be sure to attach the attached extension tube before injecting the resin. * When the extension nozzle is attached, the perforatio... Read More
    Set Contents  Mixing nozzle, extension tube, 10 each  Outer Diameter (Φmm)  (Mixing) 18  Length (mm)  (Mixing) 170 
    from S$63.99
    Min. 2 days
  33. Eagle anchor EG type steel metric screw
    SANKO TECHNO Eagle anchor EG type steel metric screw
    Nemeji anchor for AR chemical setter (EA-500 / 500S / 500W / EX-350 / 400L). It maximizes the ability of the adhesive resin and firmly fixes it in the concrete hole. It is possible to adjust the non-landing and attach / detach the attachment, which is unique to the Nemeji type. Bench installation... Read More
    from S$6.99
    Min. 2 days
  34. Chemical cutting (iron / dove) (small box)
    Osaka Spirit Chemical cutting (iron / dove) (small box)
    Surface Treatment  Dove  Material  Iron 
    from S$3.19
    Min. 3 days
  35. Eagle anchor EG type Stainless steel metric screw
    SANKO TECHNO Eagle anchor EG type Stainless steel metric screw
    Material  Stainless steel 
    Rating:
    80%
    from S$12.99
    Min. 2 days
  36. GLG Gun
    Nihon Decoluxe GLG Gun
    When the trigger is released, the resin discharge stops. A lightweight and easy-to-use manual gun.
    from S$479.90
    Min. 2 days
  37. Chemical Anchor Decora PG type
    UNIKA Chemical Anchor Decora PG type
    Rating:
    90%
    from S$6.19
    Min. 4 days
  38. Perfix resin capsule (organic capsule-type adhesive anchor)
    N Pat Perfix resin capsule (organic capsule-type adhesive anchor)
    Anchor system that has excellent durability and shows high physical properties by using unsaturated polyester resin that cures quickly at room temperature and is stable, and uses the highest-ranked screw-based unsaturated polyester resin as the main agent. Is established. * RC-12, RC-16, RC-20, R... Read More
    from S$44.99
    Min. 6 days
  39. EL dedicated gun
    Nihon Decoluxe EL dedicated gun
    When the trigger is released, the resin discharge stops. A lightweight and easy-to-use manual gun.
    from S$349.90
    Min. 2 days
  40. AR chemical setter AP-S type, short type
    Asahi KASEI AR chemical setter AP-S type, short type
    from S$6.79
    Min. 3 days
View : Grid List
Filter

Items 1 - 40 of 134

Set Ascending Direction