Threaded Rods
A dimension bolt is a type of bolt. Among the bolts used to fix large parts together, if the screw length is unknown unless it is just before, the head gets in the way, or if long screws outside the standard are required, both ends are nuts When it doesn't matter, it cuts only the required length. For this reason, it has no head and is longer than standard bolts. Two types of length, 285mm and 1000mm, are common standards, but it is also possible to manufacture longer lengths.
Other Related Pages
- Osaka Spirit Threaded Rod Non-chamfered End (Iron / Unichrome)* This product has a rough tip (the tip of the screw is still rolled and has no surface).Material Iron Thread Type Meter coarse Surface Treatment Unichrome
- Osaka Spirit Sliced flat point (stainless steel)This product is a flat tip (the tip of the screw is still cut, and the corner of the end is faced with a pre-emptor to the diameter of the valley of the screw).Type Fully threaded Thread Type Meter coarse Material Stainless steel (SUS304J3)
- Osaka Spirit Rough cut (iron / trivalent black) (small box)* This product has a rough tip (the tip of the screw is still rolled and has no surface).Color Black Type Fully threaded Material Iron Thread Type Meter coarse Surface Treatment Trivalent blackfrom S$78.99Min. 3 days
- Daido Hant Threaded Rod Iron / Unichrome PlatedEasy to adjust the length with all screws. For light work. For construction and equipment related. Adjust the length of tightening screws, mounting screws, etc. for use. Versatile, such as hanging from the ceiling.Type Fully threaded Material / Finish Iron / Unichrome plating
- Osaka Spirit Threaded Rod (Stainless)* This product has a rough tip (the tip of the screw is still rolled and has no surface).Type Fully threaded Thread Type Meter coarse Material Stainless steel (SUS304 equivalent)
- Osaka Spirit Threaded Rod (Stainless Steel) Length 285mmOverall Length (mm) 285 Type Fully threaded Thread Type Meter coarse Material SUS304
- Osaka Spirit Threaded Rod (Iron / Unichrome Plated) Length 285mmOverall Length (mm) 285 Type Fully threaded Material Iron / Unichrome plating Thread Type Meter coarse Surface Treatment Unichrome
- MonotaRO Meter cut out mm* Do not use for anything other than the original purpose (fastening) of the screw.Overall Length (mm) 1000 Material Equivalent SS400 Type Fully threaded Thread Type Meter coarse Surface Treatment UNIQLO (hexavalent chromium)
- Osaka Spirit Rough Cut (Iron / Plain)* This product has a rough tip (the tip of the screw is still rolled and has no surface).Material Iron (equivalent to SS400) Thread Type Meter coarse Surface Treatment Phosphate
- Osaka Spirit Dimensional cutting bolt (Iron / Unichrome plating) Inch witThe threaded part is wit. It is silver-plated. The cut surface is also unichrome plated.Number of Threads 16 Type Fully threaded Material Iron Surface Treatment Unichrome Nominal Size W3/8 Nominal Size of Screw W3/8 Thread Type Wit
- Osaka Spirit Meter cutting (stainless steel)Overall Length (mm) 1000 Type Fully threaded Thread Type Meter coarse Material SUS304
- MonotaRO Meter shredded inch whit* Do not use for anything other than the original purpose (fastening) of the screw.Overall Length (mm) 1000 Number of Threads 16 Material Equivalent SS400 Type Fully threaded Surface Treatment UNIQLO (hexavalent chromium) Nominal dimensions of screw W3/8 Thread Type Wit
- Osaka Spirit Threaded Rod (Iron / Trivalent White)* This product has a rough tip (the tip of the screw is still rolled and has no surface).Type Fully threaded Material Iron Thread Type Meter coarse Surface Treatment Trivalent white
- Osaka Spirit Meter cutting (iron / chromate)Length (mm) 1000 Surface Treatment Chromate Material Iron
- Osaka Spirit Cutting (stainless steel) Inch wit Length 285mmOverall Length (mm) 285 Type Fully threaded Material SUS304 Thread Type Wit
- Osaka Spirit Meter cutting (SUS310S)Length (mm) 1000 Type Fully threaded Thread Type Meter coarse Material SUS310S
- Osaka Spirit Dimensional cut (Iron / Unichrome plating) Inch wit Length 285mmOverall Length (mm) 285 Type Fully threaded Material SS400 Unichrome plating Surface Treatment Unichrome Thread Type Wit
- Daido Hant Stainless steel cutting boltEasy to adjust the length with all screws. It is a headless total screw. Versatile for light work, construction / equipment, ceiling suspension, etc.Length (mm) 285 Material Stainless steel (SUS304 equivalent)
- Osaka Spirit Rough cut (iron / Uniqlo) (small box)* This product has a rough tip (the tip of the screw is still rolled and has no surface).Type Fully threaded Material Iron Thread Type Meter coarse Surface Treatment Unichrome
- Osaka Spirit ECO-BS Rough cut (Brass (low cadmium) / nickel)* This product has a rough tip (the tip of the screw is still rolled and has no surface).Material Brass Thread Type Meter coarse Surface Treatment Nickel
- Osaka Spirit Standard Cut (Iron / Plain)Length (mm) 285 Type Fully threaded Material Iron Thread Type Meter coarse Surface Treatment Phosphate
- Osaka Spirit Shredded rough tip Wit (Iron / Uniqlo) (Packed product)* This product has a rough tip (the tip of the screw is still rolled and has no surface).Type Fully threaded Material Iron Surface Treatment Unichrome Thread Type wit
- Osaka Spirit 2 Meter Cut Whitworth Thread (Iron / Plain)Length (mm) 2000 Type Fully threaded Material Iron Surface Treatment Phosphate Thread Type witfrom S$4.89Min. 3 days
- Osaka Spirit Meter Cutting (Iron / Plain)Overall Length (mm) 1000 Material Equivalent SS400 Type Fully threaded Thread Type Meter coarse Surface Treatment Phosphate
- Osaka Spirit Chopping flat (wit) (stainless steel)This product is a flat tip (the tip of the screw is still cut, and the corner of the end is faced with a pre-emptor to the diameter of the valley of the screw).Number of Threads 16 Type Fully threaded Material Stainless steel Nominal Size of Screw W3/8 Thread Type Wit
- Osaka Spirit Meter cutting (stainless steel) inch witOverall Length (mm) 1000 Type Fully threaded Material SUS304 Thread Type Witfrom S$76.99Min. 2 days
- Daido Hant Stainless steel + cut boltIt is a screw that has no head and has a threaded part as a whole. If you want to cut it to the desired length at the site as needed, or adjust the length with nuts on both sides, use it in places where it is inconvenient to have a head. * Please do not use it for any purpose other than its inten... Read MoreLength (mm) 1000 Material Equivalent to SUS304from S$7.79Min. 2 days
- Osaka Spirit Standard cut (iron / chromate)Length (mm) 285 Surface Treatment Chromate Material Iron
- Osaka Spirit Rough cut (Iron / Dob)* This product has a rough tip (the tip of the screw is still rolled and has no surface).Surface Treatment Dove Type Fully threaded Material Iron Thread Type Meter coarsefrom S$4.49Min. 2 days
- Osaka Spirit Threaded Rod Left-Hand Thread (Stainless Steel)Length (mm) 285 Type Fully threaded Thread Type Metric coarse (left) Material Stainless steel
- Osaka Spirit Shredded rough tip Wit (Iron / Uniqlo) (small box)* This product has a rough tip (the tip of the screw is still rolled and has no surface).Material Iron Surface Treatment Unichrome Thread Type witfrom S$3.59Min. 2 days
- Osaka Spirit 2 meter cut (iron / chromate)Length (mm) 2000 Surface Treatment Chromate Type Fully threaded Material Iron (or standard)
- Osaka Spirit 2 Meter Cut Threaded Rod Whitworth (Iron / Hip DIP Galvanized)Length (mm) 2000 Surface Treatment Dove Type Fully threaded Material Iron Thread Type wit
- Osaka Spirit Meter cutting (iron / unichrome plating) inch witOverall Length (mm) 1000 Material SS400 Unichrome plating Thread Type Wit
- Osaka Spirit Threaded Rod (Iron / Chromate)* This product has a rough tip (the tip of the screw is still rolled and has no surface).Surface Treatment Chromate Material Iron Thread Type Meter coarse
- Osaka Spirit Slicing Flat tip (stainless steel)This product is a flat tip (the tip of the screw is still cut, and the corner of the end is faced with a pre-emptor to the diameter of the valley of the screw).Thread Type Meter coarse Material Stainless steel
- Osaka Spirit 1.5 Meter Cut Whitworth Thread (Iron / Plain)Length (mm) 1500 Type Fully threaded Material Iron Surface Treatment Phosphate Thread Type wit
- Osaka Spirit Meter Cutting (SCM / Plain)Length (mm) 1000 Surface Treatment Fabric (or standard) Type Fully threaded Material SCMfrom S$26.99Min. 4 days