Caution: For measurement IG-331 20 degree, use the object has 70 or more glossiness when measured with 60 degree measuring measurement., For measurement IG-331 20 degree, use the object has 70 or more glossiness when measured with 60 degree measuring measurement., AS ONE Part Number: 1-7345-01, Additional Feature: Automatic calibration Auto power-off Display hold Overrange display Battery level indicator, Light Source Lifespan: Semipermanent, Optical System: 60degree measurement: incident angle of 60degree -euphotic angle 60degree 20degree measurement: incident angle of 20degree-euphotic angle of 20degree, Measuring Area: 60 degree measurement: 3 x 6 mm oval 20 degree measurement: 3 x 4 mm oval, Continuous Opreration Time: Over 50 hours, Display Range: 0 to 199 (resolving power 1), Light...
Usage: There are 2 ways to measure roughness comparing roughness standard specimen and real goods. In case judging max height like JIS standard , sense of touch is more accurate, except very rough surface. Touching by tip of nail is more sensitive than by ball of finger. In case checking graze of surface, sense of sight is needed. Average roughness range visually and tactility perceivable is about 0.8S., Specification: Grinding:（▽:▽▽▽▽/Rmax:0.8S/Ry:0.8） Grinding:（▽:▽▽▽/Rmax:1.6S/Ry:1.6） Grinding:（▽:▽▽▽/Rmax:3.2S/Ry:3.2） Turning:（▽:▽▽▽/Rmax:1.6S/Ry:1.6） Turning:（▽:▽▽▽/Rmax:3.2S/Ry:3.2） Turning:（▽:▽▽▽/Rmax:6.3S/Ry:6.3） Turning:（▽:▽▽/Rmax:12.5S/Ry:12.5） Turning:（▽:▽▽/Rmax:18S/Ry:18） Turning:（▽:▽▽/Rmax:25S/Ry:25） Turning:（▽:▽/Rmax:35S/Ry:35） Turning:（▽:▽/Rmax:50S/Ry:50） Turning:（▽:▽/Rmax:100S...
Caution: Measurement accuracy depends on the conditions of measurement object and the weather, and measured angle. Domestic inspection is decorated for speed gun. Valid serial number in Japan is required. Do not purchase product without Japanese domestic inspectio, Measurement accuracy depends on the conditions of measurement object and the weather, and measured angle. Domestic inspection is decorated for speed gun. Valid serial number in Japan is required. Do not purchase product without Japanese domestic inspectio, Purpose: For base ball team. To measure ball speed of tennis and volleyball. Soccer shooting speed measurement . Car race spectator. Company recreation. Education field. Coaching. Construction vehicle speed check. Traffic speed monitoring survey., For base ball team. To measur...
Operating Ambient Temperature (Degree C): 0 - 40, Power Consumption (mW): 40 (at the time of back light off), Data Memory (dots): About 1000, Battery life (hours): 60 (at the time of non-use of Backlight, continuous use), Measuring Target: Non magnetic coating on magnetic metal and insulating coating on non magnetic metal, Functions: Application memory (standard curve)
Measurement data memory
Automatic power ON/OFF
Upper and lower limit settings
Unit setup, External Output: OUTPUT IS POSSIBLE FOR PC(USB), PRINTER (RS-232 C) , Resolution (microm): Less than 100, 0.1
100 or more, 1, Dimensions (Width W x Depth D x Height H) (mm): 82x99.5x32, Display Type: Digital (LCD with backlight, minimum ...
Blade Diameter (phi mm): 4.3, Blade Length (mm): 65, Weight (ｋg): 0.23, Overall Length (mm): 175, Material: SKS-8(JIS), TRUSCO Part Number: 333-3736, Specification: Red(Indication)HRC40,(File-Hardness)HRC40 to 42/HV392 to412 Yellow(Indication)HRC45,(File-Hardness)HRC45 to 47/HV446 to 471 Yellow green(Indication)HRC50,(File-Hardness)HRC50 to 52/HV513 to 544 Green(Indication)HRC55,(File-Hardness)HRC55 to 57/HV595 to 633 Blue(Indication)HRC60,(File-Hardness)HRC60 to 62/HV697 to 746 Black(Indication)HRC65,(File-Hardness)HRC65 to 67/HV800 to 865
Purpose: Confirm roughness of finish and work, Confirm roughness of finish and work, Main Part Dimension (mm): [Y]82x47x2.8, Dimension (mm): 21x11 (standard piece), Specification: 0.8 0.8-1.6-3.2-6.3-12.5-25 6.3-12.5-25-50-100 1.6-3.2-6.3-12.5-25-50 1.6-3.2-6.3-12.5-25-50
Purpose: Applicable material: soft rubber, film roll, and spinning roll., Applicable material: soft rubber, film roll, and spinning roll., 2014 TRUSCO Published Page: 1-1065, Spring Load Value 0 to -100 Degrees (mN): 550-8050, Minimum Scale Value: 1degree , Indenter Height (mm): 2.50, Indenter Shape (mm): phi2.50 (hemispherical), Conformity Standard: JIS K 6253 ISO7619 ISO868 ASTM D 2240, Dimensions (Width W x Depth D x Height H) (mm): 60x23.5x107.7, Needle Shape: Hemisphere 2.5mm, Type: Type E (AO), Weight (g): 200, Measuring Range: 0 to 100degree, TRUSCO Part Number: 331-3972, Compatible: Soft rubber, film roll, such as spinning roll, Specification: Soft rubber, film roll, and spinning roll, etc.
Purpose: Painting / equipment, such as automobiles, ships, bridges, steel structures. Lining / resin, such as tar epoxy, rubber, enamel, sheets. Plating / zinc, such as copper, chrome, tin (except electrolytic nickel), metallikon, parkerizing, oxide film, spray de, Painting / equipment, such as automobiles, ships, bridges, steel structures. Lining / resin, such as tar epoxy, rubber, enamel, sheets. Plating / zinc, such as copper, chrome, tin (except electrolytic nickel), metallikon, parkerizing, oxide film, spray deposit, etc., Measuring Target: Paint on the magnetic metal matrix such as iron / steel, lining, sprayed film, plating (except electroless nickel plating), etc., Resolution Capability: 1microm: 0 over 999microm (switched by 0.1microm: 0 over 400microm, 0.5microm: 400 over 500micr...
2015 Trusco Published Pages: 1 1151, Storage Temperature Range (degree c): -20-+70, Display Units: microm,mm/mils, Conformity Standard: DIN EN ISO 1461,2064,2178,2360,2808,3882,ASTM B244,B499,D7091,E376, Diameter x Length L (phi mmxmm): 27x150, Operating Temperature Range (deg C): -10-+60