訂單總金額超過 * S$200* 免運費

全部商品

排序:
共 823 條結果, 第 1 - 30 條
顯示: 30 60 90
視圖: 網格視圖 列表視圖
焊接規
SK
5.00(1)
$89.23
ADD TO CART
Undercut Measuring Range (mm): 25, Pricision: Length accuracy +/-1 Angular accuracy +/-2degree, Dimension (mm): 95x68, Thickness (mm): 1.5, Material: Stainless steel (SUS420J2), Type: Welding gauge
分類 噴霧,油,潤滑脂,膠粘劑,修理,焊接用品 > 焊接用品 > 焊接儀器 > 焊接儀表
錐形塞規附帶直尺
SK
4.50(2)
$20.72
ADD TO CART
Purpose: Measurements of groove, gap, hole diameter and length., Measurements of groove, gap, hole diameter and length., Measurements of groove, gap, hole diameter and length., Measurements of groove, gap, hole diameter and length., Overall Length x Thickness (mm) (Te - PA - GE - di): 148.5x1.2, Overall Length x Thickness (Scale) (mm): 155x0.5, Finishing: Hard chrome plating, Minimum Scale (mm): 0.1, Pricision (mm): +/-0.05, Measuring Range (mm): (Taper gauge) 1-15, (linear scale) 0-130 , Material: Hardened stainless steel, Type: Taper gauge
分類 測量用品 > 標準儀/量規 > 錐度計
數顯高度尺
SK
769.90 - $1,349.90
Purpose: Ideal for measurement of molds and jigs and scribing work., Ideal for measurement of molds and jigs and scribing work., Ideal for measurement of molds and jigs and scribing work., Ideal for measurement of molds and jigs and scribing work., Slider Movement Range (mm): 8, Minimum Scale (mm): 0.01
分類 測量用品 > 遊標卡尺・千分尺・千分錶 > 遊標卡尺・高度尺・深度計 > 高度尺
胎紋深度尺
SK
5.00(2)
$9.18
ADD TO CART
Unit Dimensions (Length L x Width W x Thickness)(mm): 88x28x12, Scale: 0/0.8/1/1.6/2/2.4/3/3.2/4/5/6/7/8/9/10 see far 11/12/13/14/15/16/17/18/19/20/21/22(until 3.2mm red), Measuring Range (mm): 0 - 22, Weight (g): 15, Specification: with clip, Application: Tire groove depth measurement
分類 汽車,卡車設備 > 輪胎,懸掛系統 > 輪胎充氣相關 > 輪胎規 > 深度測量儀 > 指針型
角度尺
SK
5.00(1)
$169.90
ADD TO CART
Measurement Pricision: +/- 0.5 degree (angle), Weight (g): 73.5, Material: Stainless steel (SUS410), TRUSCO Part Number: 412-1678, Specification: Open tip (bevel) angle: 25 - 65 degree (minimum reading 0.5 degree) Tilt angle of the stud after welding joint: 70 - 110 degree
分類 噴霧,油,潤滑脂,膠粘劑,修理,焊接用品 > 焊接用品 > 焊接儀器 > 焊接儀表
錐形塞規
SK
5.00(6)
34.48 - $41.80
Finishing: Hard chrome plating, Minimum Scale (mm): 0.05, Pricision (mm): +/-0.04, Overall Length (mm): 160, Width (mm): 11, Material: SC material, Type: Taper gauge
分類 測量用品 > 標準儀/量規 > 錐度計
輕型標度放大鏡
SK
4.44(9)
99.85 - $119.90
Magnification: [Y]10 X, Accessories: Two scales (finishing of one-sheet attachment), one rag, 41x3 batteries LR (for testing), one connecting part protection cap
分類 測量用品 > 光學測定 > 放大鏡 > 放大倍數/峰放大鏡
鐳射水平儀
SK
3.40(5)
$129.90
ADD TO CART
Caution: Laser glasses are glasses to recognize laser light. Not safeguard. Never look into laser light directly., Laser glasses are glasses to recognize laser light. Not safeguard. Never look into laser light directly., Distance: (Case of irradiating the wall in the room) recognition / about 10m, Laser: Visible light semiconductor laser, Laser Wavelength (nm): 635, Mode: Laser radiation / horizontal + vertical, horizontal, vertical, horizontal + vertical (correction outside warning canceled), Line Width (mm): (: In the case of ambient illumination 40lx) about 4 5m, Laser Output: Less than 1mW (JIS standard class 2), Lifespan: Laser / about 3000h, Braking System: Magnetic braking, Batteries: Two AA batteries (included for testing), Operating Temperature Range: 0 - 40deg C, Automatic Correc...
分類 測量用品 > 角度計/水準器,水準儀/測量 > 鐳射水平儀
數顯小型深度尺
SK
24.15 - $31.89
Purpose: Depth measurement, Depth measurement, Depth measurement, Depth measurement, Minimum Scale (mm): 0.1
分類 測量用品 > 遊標卡尺・千分尺・千分錶 > 遊標卡尺・高度尺・深度計 > 深度尺 > 數字類型
卡尺劃線工具
SK
5.00(1)
77.26 - $219.90
分類 測量用品 > 劃線工具/沖頭 > 羅盤
數碼卡鉗
SK
2.60(5)
96.64 - $299.90
Depth bar (with and without): Available, Batteries: SR44, Minimum Scale (mm): 0.01, Dimensions E (mm): 67, Dimension F (mm): 38.5, Material: Stainless steel
分類 測量用品 > 遊標卡尺・千分尺・千分錶 > 遊標卡尺・高度尺・深度計 > 遊標卡尺 > 數顯遊標卡尺
錐度計
SK
3.80(5)
13.21 - $20.72
Plate Thickness (mm): 1.2, Instrumental Error (mm): +/-0.05, Scale Interval (mm): 0.1, Hardness: HV480, Type: Taper gauge
分類 測量用品 > 標準儀/量規 > 錐度計
檢查鏡
SK
3.00(1)
9.50 - $12.72
Handle Length (mm): 150
分類 測量用品 > 光學測定 > 檢查鏡・檢查燈 > 檢查鏡
焊縫量尺
SK
5.00(2)
65.82 - $209.90
Purpose: General welding, construction, shipbuilding, bridges, etc., Bearing Accuracy (Deg): +/-0.7, Thickness (mm): 4.3(2), Material: All stainless steel (SUS420J2)
分類 噴霧,油,潤滑脂,膠粘劑,修理,焊接用品 > 焊接用品 > 焊接儀器 > 焊接儀表
輕型標度放大鏡用LED燈
SK
5.00(2)
22.16 - $27.21
Overall Height (mm): 15
分類 測量用品 > 光學測定 > 放大鏡 > 零件,選項
圓柱形錐度量規 No.710A
SK
5.00(1)
$41.32
ADD TO CART
Minimum Measurable Value: 0.1mm , Finishing: Hard chrome plating, Pricision: +/-0.05mm, Measuring Range (mm): 1 - 6 , Overall Length (mm): About 93, Material: SK MATERIAL (CARBON STEEL), Type: Taper gauge
分類 測量用品 > 標準儀/量規 > 錐度計
內徑千分尺
SK
5.00(1)
269.90 - $299.90
Purpose: Inner dimension measurement, Inner dimension measurement, Inner dimension measurement, Inner dimension measurement, Minimum Scale (mm): 0.01, Dimensions C (mm): 8, Dimensions B (mm): 5, Dimensions D (mm): 18, Dimensions A (mm): 28
分類 測量用品 > 遊標卡尺・千分尺・千分錶 > 千分尺 > 指針外側千分尺 > 卡尺類型
標準便攜卡尺
SK
3.00(2)
$41.80
ADD TO CART
Depth Bar: Available, Instrumental Error (mm): +/- 0.05, Minimum Scale (mm): 0.05, Dimensions C (mm): 14, Dimensions B (mm): 60, Dimensions D (mm): 30, Dimensions A (mm): 160, Measuring Range (mm): 100, Weight (g): 70, Material: Stainless steel (hard chrome plating finish), Accessories: Portable case
分類 測量用品 > 遊標卡尺・千分尺・千分錶 > 遊標卡尺・高度尺・深度計 > 遊標卡尺 > 標準型遊標卡尺
環式照明交換用燈
SK
4.00(1)
$14.09
ADD TO CART
Rated Power Consumption (W): 8, Outer Diameter (phi mm): 92
分類 測量用品 > 光學測定 > 顯微鏡附件
疾病計
SK
3.75(4)
9.18 - $45.74
Leaf Width (mm): 12.7, Material: Carbon tool steels
分類 測量用品 > 標準儀/量規 > 塞尺 > 疾病計(集)
鑽頭角度規
SK
2.50(2)
$38.24
ADD TO CART
Point Angle (Degree): 118degree, Dimension (mm): 110x22, Thickness (mm): 10.3, Material: Tool steel (SK material), Type: Drill edge gauge
分類 測量用品 > 標準儀/量規 > 鑽頭尖端檢測
斜角箱
SK
4.00(3)
$219.90
ADD TO CART
Caution: Reading accuracy / quantization error (+/-1 count) not included., Reading accuracy / quantization error (+/-1 count) not included., Reading accuracy / quantization error (+/-1 count) not included., Reading accuracy / quantization error (+/-1 count) not included., Purpose: angle measurement and assembly of mashine, mold and tools. Angulation of processing standard, angle measurement and assembly of mashine, mold and tools. Angulation of processing standard, angle measurement and assembly of mashine, mold and tools. Angulation of processing standard, angle measurement and assembly of mashine, mold and tools. Angulation of processing standard, Minimum Value (degree): 0.1, Pricision: Reading / +/- 0.2 degree, Power: CR2032 (LITHIUM BATTERY), Operating Temperature Range (deg C): 5 - 45...
分類 測量用品 > 角度計/水準器,水準儀/測量 > 水準器 > 水準器 > 數字調平機
標準氣缸規(帶千分錶)
SK
4.00(3)
179.90 - $279.90
Repeat Precision (micrometer): 3, Minimum Display (mm): 0.01, Specification: Dial gauge
分類 測量用品 > 遊標卡尺・千分尺・千分錶 > 千分錶 > 標準千分錶
帶刻度內外兼用卡鉗
SK
119.90 - $189.90
Purpose: Outer dia., inner dia., thickness, and groove measurement, Outer dia., inner dia., thickness, and groove measurement, Outer dia., inner dia., thickness, and groove measurement, Outer dia., inner dia., thickness, and groove measurement, Instrumental Error (mm): +/-0.5, Scale Interval (mm): 1, Material: Stainless steel (tip hardening)
分類 測量用品 > 劃線工具/沖頭 > 羅盤
孔間距用數顯遊標卡尺
SK
5.00(1)
299.90 - $329.90
Purpose: Quick measuring the dimension between centers of holes (Inter hole dimension : D150A/displayed value + 5mm, D-150A2/displayed value +10mm), Quick measuring the dimension between centers of holes (Inter hole dimension : D150A/displayed value + 5mm, D-150A2/displayed value +10mm), Quick measuring the dimension between centers of holes (Inter hole dimension : D150A/displayed value + 5mm, D-150A2/displayed value +10mm), Quick measuring the dimension between centers of holes (Inter hole dimension : D150A/displayed value + 5mm, D-150A2/displayed value +10mm), Depth Bar: Not available, Minimum Scale (mm): 0.01, Dimensions E (mm): 38, Dimension F (mm): 16, Dimensions A (mm): 241, Power: With 1 piece attachment for SR44 (silver oxide cell) test, Material: Stainless steel
分類 測量用品 > 遊標卡尺・千分尺・千分錶 > 遊標卡尺・高度尺・深度計 > 遊標卡尺 > 數顯遊標卡尺
撥卡尺
SK
87.76 - $119.90
Purpose: Outer diameter measurement, Outer diameter measurement, Outer diameter measurement, Outer diameter measurement, Plug Depth (mm): 35, Instrumental Error (mm): +/-0.1, Scale Interval (mm): 0.05, Measuring Range (mm): 0 - 15, Weight (g): 75, Material: Steel (silver finishing)
分類 測量用品 > 遊標卡尺・千分尺・千分錶 > 千分錶 > 千分錶應用測量儀器 > 指針式卡規
錶盤式測徑規
Purpose: Outer diameter measurement, Outer diameter measurement, Outer diameter measurement, Outer diameter measurement, Plug Depth (mm): 35, Instrumental Error (mm): +/-0.1, Scale Interval (mm): 0.05, Measuring Range (mm): 0 - 10, Weight (g): 75
分類 測量用品 > 遊標卡尺・千分尺・千分錶 > 千分錶 > 千分錶應用測量儀器 > 指針式卡規
內撥卡尺
SK
2.00(1)
209.90 - $419.90
Purpose: Inner diameter measurement, Inner diameter measurement, Inner diameter measurement, Inner diameter measurement, Leg Length (mm): 80, Instrumental Error (mm): +/-0.05, Material (Body): Steel
分類 測量用品 > 遊標卡尺・千分尺・千分錶 > 千分錶 > 千分錶應用測量儀器 > 指針式卡規
數字滾動式測距輪
SK
4.75(8)
96.78 - $109.90
分類 測量用品 > 測量設備 > 滾輪測距儀
數顯深度尺
SK
4.00(2)
189.90 - $309.90
分類 測量用品 > 遊標卡尺・千分尺・千分錶 > 遊標卡尺・高度尺・深度計 > 深度尺 > 數字類型

1 2 3 4 5 6 7 8 9 10 ...28

Niigata Seiki 相關商品

相關商品