共 11 條評價, 第 1 - 11 條
On 2017-12-21 22:25:36
Used in combination with a plastic syringe, the nozzle is long so it can be used without waste to the bottom of the bottle.
Dyeing of polyester cloth (petals)
On 2016-04-15 19:39:39
Our company is a manufacturer who is making artificial flowers Recently we used a syringe to dyed a hole in the center to dye a polyester fabric, but since the tip of the syringe is short, dye a large amount of fabric It was difficult, but by using this nozzle many petals could be dyed. If I want a desire, I also want a nozzle whose nozzle length is shorter than it is now.
Nozzle of adhesive container
On 2015-12-09 13:48:35
Drug injection into trees
On 2015-10-19 14:07:15
It is used for medicine injection in the hole of a beetle of a tree. Ideal for bending the tip slightly. 100 with a syringe with attached thing and appearance are the same size and think that the price is expensive.
Inhalation work of liquid
On 2014-11-06 16:10:42
The making is also solid, the needle is long, it is a convenient nozzle that can inhale liquid that is left in the deep bottle bottom neatly.
Adhesive Injection / Coating
On 2014-05-31 14:55:32
Size (both length and thickness) is appropriate and the price is cheap and good. However, it is possible to use it by the Bonde E set as much as possible. It is not quite suitable for the adhesive with higher viscosity - Quick Mender etc. Acrylic adhesive - methylene chloride etc. - When used it may want a smaller diameter. It is perfect if you have a narrow tip and a thick tip.
Plumbing internal scratch injection of fluorescent agent for fluorescent flaw detection etc.
On 2013-02-15 13:44:22
Fluorescent agents are difficult to clean up when spilled, but if this is done, it can inject well without dropping a single drop. Work efficiency has risen dramatically.
For bonding work
On 2012-11-06 15:52:07
The number of 1 unit is too many for 10, so I want you to sell about 5 items.
Work to dispose ink as dots continuously at a stroke.
On 2012-07-01 04:25:37
It was too thick to be useful. I experimented with viscosity considerably, but I could not use it with this thickness. I am hoping for thinner ones.
Injection of adhesive
On 2011-10-20 00:15:41
Thick, too fat. It has an outer shape of 1.3 mm. This can not be used for fine workmanship. Can you sell around 0.5 mm in outer shape
To inject resin into cracks in concrete.
On 2011-09-19 19:24:14
It was perfect fit for Terumo syringe and it was comfortable to use. If there is a product whose tip is flattened, it can be injected into a narrow gap. This time I cut the tip like a syringe needle and tried using it, but after all it leaked from the tip and it did not go well. It was possible to work comfortably if there was something like vinyl parts attached to the tip of Aron Alpha.
51.99 - $159.99
219.99 - $589.99
229.99 - $489.99