塑膠空氣吹塵槍 Joplastar II 的顧客評價
共 18 條評價, 第 1 - 18 條
Maintenance of machinery from product cleaning
On 2017-08-05 18:47:26
I think that it is hard to use when hooking this air duster, Others are in good condition. I am using it by pulling the pulled part and widening the gap
Used for equipment maintenance
On 2017-07-10 15:51:34
Anyway it is light. Since the amount of air can be adjusted, the shape of the tip can be optionally changed It is better to be able to change according to the place to use. If it is a thing of the metal so far it dropped and the nozzle was broken, but because it will not break if this As a result, the cost is down. I would like you to sell adapters such as silencers that will be ordered by Monotaro.
On 2017-05-19 19:34:37
I bought that the product will not be scratched, but I am pleasantly surprised at its powerful power. Durability is unknown but it is light so I decided to purchase another one for the onsite work.
In the factory
On 2016-09-29 19:26:49
It was light weight, adjustment of AIR amount and maximum strength was also sufficient.
On 2016-08-03 02:52:36
Cleaning interior tools, powdering work clothes
On 2016-06-08 20:08:04
It seems to be more powerful and useful than I thought. If there are difficulties, there are things that air leaks from the connection part. Just because I can solve it if I mistake it so much, I do not care.
Used for precision machining
On 2016-04-06 21:01:17
Metal air duster is too much damaged at the contact of processed goods This product is plastic and it is recommended that damage is small. What you would like to ask in the future for this product would like to ask you to adjust the air volume with a nozzle at the trigger. Especially, I'd like to ask for a subtle volume adjustment for the trigger hand grip.
As an air duster
On 2016-03-24 15:27:40
It is durable though it is light. Moreover, it is cheap. Trigger is also easy to use greatly. It is good to be able to adjust the flow rate. When it is maximized, a considerable amount of air will come out and it will be saved because we can make it weak when blowing off the dust of delicate parts. You can adjust the flow rate by gripping, but you can make it work only as a certain amount even if you hold a lot, so work efficiency increases.
Removal of water droplets etc. after car wash
On 2015-12-15 14:54:04
Light weight and everything is plastic, so it is difficult for cars to get scratched. Also, there is no occurrence of rust.
Cleaning of manufacturing equipment
On 2015-09-19 09:41:02
It is light and hardly breaks even if it falls by chance. Unknown about the durability of moving parts
Air blow work
On 2015-03-13 14:57:29
I actually surprised the lightness. It was a bit uneasy that the one-touch plug part connected to the air hose was made of plastic, but I was worried about air leaks etc, and it can be used without problems. If there is a drawback, the thread of the nozzle part is not M4 in general but a tapered screw with a pneumatic device, but the company's resin long nozzle (TLN - 140) can be used as it is, I seemed to be able to convert to G (PF) 1/4 female screws inexpensively with an optional adapter (AD - 1/4), so I felt it was not a big problem. I think that it is worthwhile if it is in the thousand-yen range.
Cleaning work with air blow +
On 2013-12-13 13:15:38
The body is light and does not get tired even for long working hours.
Sheet metal, machining and other factory work
On 2013-10-12 23:29:31
Because it is light weight, it is resistant to falling and shocks and it can be used for a long time without breakage compared with metal one. It does not dissolve in organic solvents such as acetone and thinner, it does not break internal valves, it has not been broken for over 8 years after purchasing with long nozzle, but unlike TRUSCO, there is no need for continued purchase. It seems to have durability that it does not become a comparison with metal in places like falling down frequently.
To metal blown air blow
On 2011-09-13 13:19:18
I'd be happy if I can adjust the air volume adjustment a bit more finely, but afterwards the cycle of air leakage is too early and there are some things broken in the shortest 2 months as compared with the type without previous air volume adjustment.
On 2011-06-28 00:54:43
First of all, it's good to have light weight. I bought it with a half-doubt that it is a high power, but I am quite satisfied.
Connect trash in the computer to the compressor and skip it
On 2011-05-28 12:56:01
Although it is light, it is good, although the tip adapters are on various instructions, it is good to have them on the catalog together
Car maintenance, repair etc.
On 2009-05-06 17:29:21
Air volume adjustment is GOOD! Skipping dust and water is also very good with high power, and it is also less tired to use for a long time.
Removal of product scraps and others. I skip the garbage on my clothes.
On 2008-05-10 02:41:08
I tried many types of air gun, but it is pretty good. The most powerful thing is the charm. You can also adjust the power. Although it is made of plastic it is strong and there is no air leak from the joint part at all.
16.98 - $36.80
31.77 - $34.54
KUBOTA ChemiX (Kubota-C.I.)
5.79 - $11.50
11.00 - $35.09
63.61 - $77.55
65.33 - $119.90