Recycling disassembly work
On 2016-05-07 21:19:36
Disassemble by removing the set screw of 6P outlet
On 2016-03-31 08:25:39
The screwdriver is used to disassemble and disassemble the 6P socket setscrew and change it to the length of easy-to-use cord. For existing lengths of 1 m and 2 m, make it the proper length when there is not enough or the length is insufficient.
On 2015-02-12 18:47:24
It is easy to work without scratches by substitute tools, etc. as well as loosening work, surely fastening only for special screws. Grip is also easy to grasp.
Special tightening cable taps etc.
On 2014-11-25 17:15:56
The fit is good, the length of the rod is perfect.
Repair of table tap with 4 mouth AC
On 2014-02-09 17:43:10
For replacing the power cord of the table tap. I bought it. The screw size is as per the standard, but the mounting hole on the table tap side is only 6 mm in outer dimensions and the driver shaft diameter is 7 mm, so it is necessary to widen the mounting hole by drilling and it took time to replace. = Does the driver side shaft diameter become thinner 1