訂單總金額超過 * S$200* 免運費

套筒螺絲刀

3.45 (11)
2015 Trusco Published Pages
2 0424
Material (handle)
plastic
Blade Shape
Nut (hexagonal)
...查看全部>
商品選項
加入購物車
Dimensions C (mm) Dimensions B (mm) Grip Diameter (phi mm) Dimensions A (mm) Shaft Length (mm) Subtense(mm) Weight (g) Overall Length (mm) Shaft Diameter (phi mm) TRUSCO Part Number Package
Qty.
Ship pack of Mfr.# Item.# 銷售價格 Availability 數量
Dimensions C (mm) Dimensions B (mm) Grip Diameter (phi mm) Dimensions A (mm) Shaft Length (mm) Subtense(mm) Weight (g) Overall Length (mm) Shaft Diameter (phi mm) TRUSCO Part Number Package
Qty.
Ship pack of Mfr.# Item.# 銷售價格 Availability 數量
11, 11 25, 25 18, 18 35, 35 125, 125 7, 7 64, 64 210, 210 5.5, 5.5 368-7368, 368-7368 1PC 1 DN-07 05236795 $5.99
In stock
14, 14 24, 24 22, 22 35, 35 125, 125 10, 10 98, 98 220, 220 6.3, 6.3 395-4927, 395-4927 1PC 1 DN-10 05236822 $7.99
In stock
9, 9 25, 25 18, 18 35, 35 125, 125 6, 6 57, 57 210, 210 5.5, 5.5 395-4897, 395-4897 1PC 1 DN-06 05236786 $4.99
In stock
17, 17 24, 24 22, 22 36, 36 125, 125 12, 12 107, 107 220, 220 6.3, 6.3 368-7376, 368-7376 1PC 1 DN-12 05236847 $7.99
In stock
6, 6 9, 9 11, 11 18, 18 75, 75 4, 4 12, 12 130, 130 3, 3 368-7333, 368-7333 1PC 1 DN-02 05236743 $3.99
In stock
7.5, 7.5 25, 25 13, 13 35, 35 75, 75 5, 5 31, 31 145, 145 4, 4 368-7341, 368-7341 1PC 1 DN-04 05236761 $4.99
In stock
6, 6 9, 9 11, 11 18, 18 75, 75 3, 3 13, 13 130, 130 3, 3 395-4871, 395-4871 1PC 1 DN-01 05236734 $3.99
In stock
9, 9 25, 25 18, 18 35, 35 125, 125 5.5, 5.5 57, 57 210, 210 5.5, 5.5 368-7350, 368-7350 1PC 1 DN-05 05236777 $4.99
In stock
12, 12 26, 26 18, 18 35, 35 125, 125 8, 8 68, 68 210, 210 5.5, 5.5 395-4901, 395-4901 1PC 1 DN-08 05236804 $7.99
In stock
13, 13 27, 27 18, 18 35, 35 125, 125 9, 9 73, 73 210, 210 5.5, 5.5 395-4919, 395-4919 1PC 1 DN-09 05236813 $5.99
Shipped after 2018-05-30
8, 8 9, 9 13, 13 18, 18 75, 75 4.5, 4.5 24, 24 145, 145 4, 4 395-4889, 395-4889 1PC 1 DN-03 05236752 $3.99
In stock
加入購物車
顧客評價
5 星 3
4 星 3
3 星 3
2 星 0
1 星 2
好評率: 3.45
11 顧客評價
顧客評價由穀歌基於日文自動翻譯
For maintenance of equipment
4
From Japan
On 2018-02-07 20:41:30
Because there is a little wall thickness, it may not enter depending on the place. However, with just this, workability has improved much. It is easy to understand into the handle if possible and there is no mention of the size of the nut.
This review is about item#5236777.
For PC maintenance
5
From Japan
On 2017-02-18 22:47:30
I stuck a little and chose a thin one. Working efficiency has improved dramatically. I am satisfied.
This review is about item#5236761.
Maintenance of the motorcycle
5
From Japan
On 2016-08-03 21:25:37
It is cheap and there is, it is very convenient.
This review is about item#05236822.
Nut stop
4
From Japan
On 2016-04-02 15:16:17
Because the embroidery is thin, the force does not need the sun
This review is about item#05236795.
Assembling of electronic equipment
4
From Japan
On 2016-03-02 15:49:06
The shaft was too long and it was difficult to handle.
This review is about item#05236761.
Hand work.
5
From Japan
On 2014-05-17 06:54:50
Especially it is used especially for tightening work of small hand nut and returning work.
This review is about item#05236795.
Tightening of Jubilee Band
3
From Japan
On 2013-11-14 13:31:36
I think that it would have been satisfactory if it were to install parts on the board. When using it for tightening the Jubilee band, I felt that a slightly thicker grip was better to apply the torque.
This review is about item#05236777.
When interior decoration and fender temporary adjustment etc.
3
From Japan
On 2013-09-04 22:11:16
Grip place, feeling slippery · · · I use it with red grip, number 80 and slip prevention
This review is about item#05236847.
Loosen and tighten the nut
1
From Japan
On 2013-07-22 21:32:19
I ordered and stocked it as a spare item, so I did not use it for more than a year. (I can not return it?) I did not notice any abnormalities. As I saw nuts not turning, it was only with pipes around 10 φ with no mountain. I wonder how to sell the nut drivers that nuts will not stop in peace.
This review is about item#05236804.
General maintenance
1
From Japan
On 2011-11-02 10:51:51
The one that arrived first was bent in the grip and stuck, and it could not be used. The item after exchange is not straight. It is the lowest item of doubt even whether it is inspecting. It is better not to buy it.
This review is about item#05236752.

相關商品